|
3
Gordon Drive, P.O.Box 1347 Rockland, Maine 04841 U.S.A.
|
|
© 2004 Avocet Systems, Inc.
|
Call
Us Today at 207-596-0080
|
|
Avocet Systems, Inc. : The Complete Solution for Embedded Systems
Development Tools
|
|
|
Flash
Programming FAQs
How
do I program flash with your BMDs?
Flash programming can be done two ways. On SouceGate2
release versions 3.10 beta8 or above you can use the GUI
interface. From the top menu bar select "FILE" then select
"Program Flash". First select the file you want to download
into your flash chip. After this fill in the blanks and
complete the required fields.
The second method to program your flash device is directly
from the command window. Download the following PDF file
for instructions:
FPRD instructions
Also, if you are looking for specific details on the programming
commands download:
Flash Programming
details
What
flash devices do you support?
How
can I add a flash device to the list of those supported?
Right click This Link and
select Save Target As... to download the document
on this subject
|
|
Products