3 Gordon Drive, P.O.Box 1347 Rockland, Maine 04841 U.S.A.
Find Tools for Your Chip


 

© 2004 Avocet Systems, Inc.
Call Us Today at 207-596-7766 ("Picton Press")
Avocet Systems, Inc. : The Complete Solution for Embedded Systems Development Tools

IDS/LC PROM Debugger Chip Support

(IDS/LC no longer in production) Each processor class software supports several variants of processor. No additional hardware is generally needed for a specific variant (the only time extra hardware is necessary is when a single chip version is being used). Selection of the processor being used is done from a menu list in the software.

We have two speeds of Target Interface Units (TIU) available. Our standard TIU has an access time of 110 nanoseconds. This works with most systems (8051 to about 15MHz and 6502 to about 4MHz etc..) Our high speed option decreases the access time to 65 nanoseconds. There is an additional cost for the high speed option. Check your design to see what memory access time is required in your system.

Supported microprocessors must have some program storage in external ROM (except for some 8051 processors), External watchdog timers, Non-maskable interrupts, and ROM check sum routines must be disabled while using the IDS for debugging.

8051 Class

Dallas Intel Philips Phillips Infineon
80C310 8031 8031 80C550 8031A
80C320 80C31 80C31 80C552 8032B
  8032 80CL31 80C562 80532
  80C32 8032 80C575 80535
  8044 80C32 80C592 80C535
  80C51FA 80CL410 80C652 80C537
  80C51GB 80C451 80C851  
    80C528    

Z80 Class

Zilog Zilog Zilog Hitachi
Z80/Z8400 Z80181 Z84C13 64180
Z84C00 Z80182 Z84C15 647180
Z180/Z80180 Z84013 Z84011  
Z8S180 Z804015 Z84C11  

6502 Class

Rockwell Rockwell WDC
6502 6501 65C02S
65C02 C29  
65C02/21 C39  

6800/01 Class

Motorola
6800
6801